Crystal Type
Separate materials by the confirmed crystal or gemstone identity.
Factory & Quality Control
How We Process, Inspect and Pack Crystal Products
From incoming material checks and sorting to assembly, final inspection and shipment preparation, each order is reviewed against its confirmed specifications.
Step 01
Material Receiving
Incoming crystal materials and components are checked against the confirmed order requirements before they move into sorting or processing.
01
Material Name
Confirm the declared crystal, gemstone or other material name.
02
Color Range
Compare the received batch with the agreed color range or approved reference.
03
Raw Material Size
Review the supplied dimensions and usable size range for the intended product.
04
Visible Cracks
Identify obvious cracks, chips or damage that may affect processing or use.
05
Order Consistency
Verify that the material and components correspond with the purchase specification.
Step 02
Sorting
Materials are grouped using product-specific criteria so that selected pieces remain suitable for the confirmed design and batch requirements.
Color
Group pieces within an agreed hue, tone and saturation range.
Clarity
Review transparency and visible inclusions according to the product standard.
Size
Separate pieces by the dimensions required for the product or strand.
Pattern
Coordinate natural veining, banding or mineral pattern where applicable.
Surface Condition
Screen for visible chips, deep scratches, pits or processing damage.
Step 04
Drilling and Polishing
Hole placement, usable openings and surface finishing are reviewed before beads and crystal pieces move to matching or assembly.
-
01
Hole Position
Check centering and placement against the intended assembly method.
-
02
Hole Diameter
Measure the opening using the actual specification agreed for the order.
-
03
Broken Holes
Screen for edge breakage, cracking or unusable openings.
-
04
Surface Polish
Review gloss, visible tool marks and overall surface finish.
-
05
Edge Treatment
Check sharp or rough edges that may affect handling or assembly.
-
06
Final Cleaning
Remove processing residue before the next inspection stage.
Step 04
Drilling and Polishing
Hole placement, usable openings and surface finishing are reviewed before beads and crystal pieces move to matching or assembly.
-
01
Hole Position
Check centering and placement against the intended assembly method.
-
02
Hole Diameter
Measure the opening using the actual specification agreed for the order.
-
03
Broken Holes
Screen for edge breakage, cracking or unusable openings.
-
04
Surface Polish
Review gloss, visible tool marks and overall surface finish.
-
05
Edge Treatment
Check sharp or rough edges that may affect handling or assembly.
-
06
Final Cleaning
Remove processing residue before the next inspection stage.
Step 05
Bead Matching
For bracelets, necklaces and bead strands, individual beads are coordinated to support a balanced finished product while respecting natural material variation.
Color coordination within the approved batch range
Bead size consistency for the confirmed specification
Pattern balance across natural veining and inclusions
Bead sequence according to the approved design
Left-right symmetry where the product requires it
Finished length checked against the order requirement
Step 06
Product Assembly
Approved crystal pieces and components are assembled according to the confirmed product design, construction and branding requirements.
Bead Stringing
Arrange and string beads in the approved order and length.
Chain Connection
Connect chain sections and joining components for the specified construction.
Clasp Installation
Install and check clasps, jump rings and closures.
Pendant Assembly
Set pendant orientation and connect bails or supporting parts.
Metal Findings
Attach spacers, caps, connectors and other confirmed findings.
Labels & Brand Cards
Add approved product tags, labels or branded cards when included.
Step 07
Final Quality Control
Final inspection points are selected by product type and checked against the confirmed order specification before packing.
| Product Type | Main Inspection Points |
|---|---|
| Bead Strands | Bead diameter, hole diameter, strand length, quantity and color range |
| Bracelets | Finished size, elastic cord, bead matching and knot finishing |
| Necklaces | Total length, clasp, pendant direction and connection security |
| Earrings | Pair consistency, components, direction and weight balance |
| Pendants | Hole position, bail, surface condition and edges |
| DIY Materials | Item type, quantity, size and packaging label |
Inspection criteria and allowable natural variation should be confirmed according to the crystal type, product construction and approved order requirements.
Step 08
Packaging and Shipment
Products are protected, identified and counted before dispatch. The packing method should be confirmed according to product type, order quantity and shipping requirements.
01
Individual Bags
Separate products where needed for identification and surface protection.
02
Strand Protection
Arrange bead strands to reduce tangling, friction and pressure.
03
Scratch Protection
Use suitable separators or wrapping for polished and metal surfaces.
04
SKU Labels
Apply confirmed item codes, variants or packaging labels.
05
Quantity Check
Reconcile packed quantities with the order and packing list.
06
Outer Carton Protection
Select cushioning and carton protection appropriate for the shipment.
07
Pre-Shipment Check
Review carton condition, labels and shipment information before dispatch.
Planning a crystal product order?